View previous topic :: View next topic |
Author |
Message |
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Thu Nov 27, 2003 4:06 pm Post subject: Proplem with @next and timer function |
|
|
Hi,
I have VDS 3.51 and can't work out how to have a timer without locking up the application. I'm sure it's very simple but I just can't see it.
Also I'm creating a script that opens a command line program and then passes the contents of a list file using the @next command to open many windows until the next command hits the end of the file.
If I replace run with info I can see that the command line is being passed correctly until it reaches the end of the file then I get one last info box that contain the comand line with the variables (as in %z instead on an IP address). If I use run inplace of info then I get into a big loop and it keeps opening windows and not exiting.
The affending section of code is
Code: |
%%time = @DLGTEXT(TIMETORUN)
%c = @DATETIME(t)
If @EQUAL(%%time,%c)
LIST LOADFILE,1,subnets.dat
Repeat
%z = @NEXT(1)
%%CMDLINE = @DLGTEXT(CMDLINE)
%%fixed = -r %z -f %y-%z.txt
run %%CMDLINE %%FIXED
UNTIL @not(@OK())
GOTO evloop
|
If the full code would help I'm happy to post it.
Thanks
Mark |
|
Back to top |
|
|
BD Newbie
Joined: 07 Jun 2001 Posts: 10 Location: Canada
|
Posted: Fri Nov 28, 2003 3:49 am Post subject: |
|
|
Hey Mark
There's a few ideas for ending your loop. You could actually load your list and then use list seek 1,0 to get you to the beginning and then do an @count of the number of records in the file. If you know that the last record is always going to be the dud then your repeat until would be
until you have gone thru as many times you have actual records.
Code: |
REM all the records in the list including the dud
%%records = @count(1)
REM the correct number of records
%%lastrecord = @fsub(%%record-1)
REM or perhaps the @pred function instead of @fsub
repeat
your code
%%counter = @fadd(%%counter,1)
REM Keep track of the number of times you go through
until @equal(%%lastrecord,%%counter)
;quits once the record and counter are the same.
|
I'm sure the gang has some good ideas and this is what I do with 3.5. There's prolly some other slick way with vds 5
As far as the timer goes
:Evloop
repeat
wait .5
gosub something
until @equal(%%button,1)
wait event
goto @event()
This will wait for a button to be pressed and then some other event. Lots of possibilities, just depends on what ya got to wait for.
Good luck
Last edited by BD on Fri Nov 28, 2003 4:20 am; edited 2 times in total |
|
Back to top |
|
|
Serge Professional Member
Joined: 04 Mar 2002 Posts: 1480 Location: Australia
|
Posted: Fri Nov 28, 2003 3:59 am Post subject: |
|
|
hi bd,
just a minor observation with your code...vds does not support ";" for comments like other languages do...and certainly not on the same line...you need to use REM on a fresh line for your comments
serge _________________
|
|
Back to top |
|
|
BD Newbie
Joined: 07 Jun 2001 Posts: 10 Location: Canada
|
Posted: Fri Nov 28, 2003 4:16 am Post subject: |
|
|
Hey Serge
Just threw it in for comment is all, Normally I do put in the Rem just a wee bit lazy this evening.
Its unfortunate that we can't comment on the same line like that. Oh well. C'est la vie. |
|
Back to top |
|
|
Serge Professional Member
Joined: 04 Mar 2002 Posts: 1480 Location: Australia
|
Posted: Fri Nov 28, 2003 8:46 am Post subject: |
|
|
fair enough, bd...didn't know if you knew...i agree that it would be nice if we could do that
serge _________________
|
|
Back to top |
|
|
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Fri Nov 28, 2003 8:57 am Post subject: |
|
|
I did think of setting it to count but I need to be able to ad and remove entries from the file, so the number would be changing.
I'll try the timer with evloop code though.
Thanks
Mark |
|
Back to top |
|
|
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Fri Nov 28, 2003 9:11 am Post subject: |
|
|
If it makes things easier here's the full code. (I know it's a mess but I'm still learning )
Code: |
Title HfNetCHK Full Subnet Scan
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
%A = @item(1)
If @null(%A)
List Close,1
goto FIRSTRUN
End
List Close,1
%f = @DATETIME(yy-mm-dd)
%y = %F %Z
:begin
rem Dialog
DIALOG CREATE,HfNetCHK Full Subnet Scan,-1,0,553,227
DIALOG ADD,STYLE,STYLE2,Tahoma,16,I,BACKGROUND,RED
DIALOG ADD,STYLE,STYLE1,Courier New,8,L,BLACK,DKGREEN
DIALOG ADD,GROUP,GROUP1,4,296,254,220,Subnets that will be scanned
DIALOG ADD,LIST,LIST1,18,304,238,198,STYLE1
DIALOG ADD,BUTTON,RUNSCAN,198,10,64,24,Run
DIALOG ADD,BUTTON,ADD,198,92,110,24,Add Subnet to Scan
DIALOG ADD,BUTTON,ABOUT,198,220,64,24,About
DIALOG ADD,TEXT,TEXT1,4,16,,,HfNetCHK Full Subnet Scan,STYLE2
DIALOG ADD,EDIT,TIMETORUN,46,150,132,19,11:00
DIALOG ADD,TEXT,TEXT2,48,10,,,Time to run daily scan:
DIALOG ADD,GROUP,GROUP2,70,10,274,118,Advanced Options
DIALOG ADD,TEXT,TEXT3,88,20,,,Command Line Option:
DIALOG ADD,EDIT,CMDLINE,106,20,258,18,c:\tools\hfnetchk\hfnetchk -o tab -vv
DIALOG ADD,TEXT,TEXT4,136,20,,,"Leave off the subnet and filename switch's"
DIALOG SHOW
List CREATE,LIST1
List LOADFILE,LIST1,@path(%0)subnets.dat
rem populate subnets to scan
rem evloop
:evloop
wait event
goto @event()
rem Abbout button
:AboutBUTTON
DIALOG CREATE,About,-1,0,395,255,ONTOP
DIALOG ADD,STYLE,STYLE1,Courier New,18,B,BACKGROUND,RED
DIALOG ADD,BITMAP,BITMAP1,116,12,376,132,C:\Documents and Settings\mgosling\Desktop\Visual Dialog Script\HFNETSCAN\logo.bmp
DIALOG ADD,BUTTON,BUTTON1,84,312,64,24,OK
DIALOG ADD,TEXT,TEXT1,8,2,,,HfNetCHK Full EMEA Scan V2.0,STYLE1
DIALOG ADD,TEXT,TEXT2,44,80,,,By Mark Gosling,STYLE1
DIALOG ADD,TEXT,TEXT3,88,30,,,"For Help and Support contact email address here"
DIALOG SHOW
goto evloop
rem Add subnet button
:addBUTTON
%a = @INPUT(Use format x.x.x.1-x.x.x.254)
If @null(%A)
Info There was nothing to add!
goto evloop
End
List Insert,LIST1,%A
List SAVEFILE,LIST1,@path(%0)subnets.dat
List Close,LIST1
goto evloop
rem start button
:runscanBUTTON
%%time = @DLGTEXT(TIMETORUN)
%c = @DATETIME(t)
If @EQUAL(%%time,%c)
LIST LOADFILE,1,subnets.dat
Repeat
%z = @NEXT(1)
%%CMDLINE = @DLGTEXT(CMDLINE)
%%fixed = -r %z -f %y-%z.txt
info %%CMDLINE %%FIXED
UNTIL @not(@OK())
GOTO evloop
else
GOTO EVLOOP
:FIRSTRUN
REM >>Used only to create a list saved to a file for this example.<<
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
List ADD,1,"135.76.230.1-135.76.230.254"
List ADD,1,"135.76.231.1-135.76.231.254"
List ADD,1,"135.76.232.1-135.76.232.254"
List ADD,1,"135.76.232.1-135.76.232.2541"
List ADD,1,"135.76.232.1-135.76.232.2542"
List ADD,1,"135.76.232.1-135.76.232.2543"
List ADD,1,"135.76.232.1-135.76.232.2544"
List ADD,1,"135.76.232.1-135.76.232.2545"
List ADD,1,"135.76.232.1-135.76.232.2546"
List ADD,1,"135.76.232.1-135.76.232.2547"
List ADD,1,"135.76.232.1-135.76.232.2548"
List ADD,1,"135.76.232.1-135.76.232.2549"
List ADD,1,"135.76.232.1-135.76.232.2540"
List ADD,1,"135.76.232.1-135.76.232.25411"
List ADD,1,"135.76.232.1-135.76.232.25422"
List ADD,1,"135.76.232.1-135.76.232.25433"
List ADD,1,"135.76.232.1-135.76.232.25444"
List ADD,1,"135.76.232.1-135.76.232.25455"
List ADD,1,"135.76.232.1-135.76.232.25466"
List ADD,1,"135.76.232.1-135.76.232.25477"
List ADD,1,"135.76.232.1-135.76.232.25488"
List ADD,1,"135.76.232.1-135.76.232.25499"
List ADD,1,"135.76.232.1-135.76.232.25400"
List ADD,1,"135.76.232.1-135.76.232.254111"
List ADD,1,"135.76.232.1-135.76.232.254222"
List SAVEFILE,1,@path(%0)subnets.dat
List Close,1
Goto Begin
rem X button
:button1BUTTON
WINDOW HIDE,About
GOTO evloop
:CLOSE
if @ask(Are you sure you want to close?)
exit
end
goto evloop
|
Thanks
Mark |
|
Back to top |
|
|
BD Newbie
Joined: 07 Jun 2001 Posts: 10 Location: Canada
|
Posted: Mon Dec 01, 2003 4:12 am Post subject: |
|
|
Hi Mark
Just taking a look at the code. I will get back to you. |
|
Back to top |
|
|
BD Newbie
Joined: 07 Jun 2001 Posts: 10 Location: Canada
|
Posted: Mon Dec 01, 2003 5:17 am Post subject: |
|
|
Ok, so I have made a few changes and added a couple of variables for you.
I made the timer so that it would only run when the time hits but you have to hit run. Had to put AM PM or it wouldn't work on my system, yours might be diff. Changed a bit of code but mainly added the timer section which is really the time IF that you originally had in the runbutton section. And added the counters in the run button section.
Have a go, I'm not sure about the rest of the stuff your running but the timer and the loop work.
Good luck.
Here's the code
Code: |
Title HfNetCHK Full Subnet Scan
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
%A = @item(1)
If @null(%A)
List Close,1
goto FIRSTRUN
End
List Close,1
%f = @DATETIME(yy-mm-dd)
%y = %F %Z
%%button = 0
:begin
rem Dialog
DIALOG CREATE,HfNetCHK Full Subnet Scan,-1,0,553,227
DIALOG ADD,STYLE,STYLE2,Tahoma,16,I,BACKGROUND,RED
DIALOG ADD,STYLE,STYLE1,Courier New,8,L,BLACK,DKGREEN
DIALOG ADD,GROUP,GROUP1,4,296,254,220,Subnets that will be scanned
DIALOG ADD,LIST,LIST1,18,304,238,198,STYLE1
DIALOG ADD,BUTTON,RUNSCAN,198,10,64,24,Run
DIALOG ADD,BUTTON,ADD,198,92,110,24,Add Subnet to Scan
DIALOG ADD,BUTTON,ABOUT,198,220,64,24,About
DIALOG ADD,TEXT,TEXT1,4,16,,,HfNetCHK Full Subnet Scan,STYLE2
DIALOG ADD,EDIT,TIMETORUN,46,150,132,19,11:00 AM
DIALOG ADD,TEXT,TEXT2,48,10,,,Time to run daily scan:
DIALOG ADD,GROUP,GROUP2,70,10,274,118,Advanced Options
DIALOG ADD,TEXT,TEXT3,88,20,,,Command Line Option:
DIALOG ADD,EDIT,CMDLINE,106,20,258,18,c:\tools\hfnetchk\hfnetchk -o tab -vv
DIALOG ADD,TEXT,TEXT4,136,20,,,"Leave off the subnet and filename switch's"
DIALOG SHOW
List CREATE,LIST1
List LOADFILE,LIST1,@path(%0)subnets.dat
rem populate subnets to scan
rem evloop
:evloop
wait event
repeat
wait .5
Gosub timer
until @equal(%%button,1)
%%button = 0
goto @event()
rem Abbout button
:AboutBUTTON
DIALOG CREATE,About,-1,0,395,255,ONTOP
DIALOG ADD,STYLE,STYLE1,Courier New,18,B,BACKGROUND,RED
DIALOG ADD,BITMAP,BITMAP1,116,12,376,132,C:\Documents and Settings\mgosling\Desktop\Visual Dialog Script\HFNETSCAN\logo.bmp
DIALOG ADD,BUTTON,BUTTON1,84,312,64,24,OK
DIALOG ADD,TEXT,TEXT1,8,2,,,HfNetCHK Full EMEA Scan V2.0,STYLE1
DIALOG ADD,TEXT,TEXT2,44,80,,,By Mark Gosling,STYLE1
DIALOG ADD,TEXT,TEXT3,88,30,,,"For Help and Support contact email address here"
DIALOG SHOW
goto evloop
rem Add subnet button
:addBUTTON
%a = @INPUT(Use format x.x.x.1-x.x.x.254)
If @null(%A)
Info There was nothing to add!
goto evloop
End
List Insert,LIST1,%A
List SAVEFILE,LIST1,@path(%0)subnets.dat
List Close,LIST1
goto evloop
rem start button
:runscanBUTTON
LIST LOADFILE,1,subnets.dat
List seek,1,0
%A = @item(1)
%%counter = 0
%%records = @count(1)
%%lastrecord = @fsub(%%records,1)
Repeat
%z = @NEXT(1)
%%CMDLINE = @DLGTEXT(CMDLINE)
%%fixed = -r %z -f %y-%z.txt
info %%CMDLINE %%FIXED
%%counter = @fadd(%%counter,1)
UNTIL @equal(%%lastrecord,%%counter)
goto evloop
:Timer
%%time = @DLGTEXT(TIMETORUN)
%c = @DATETIME(t)
if @EQUAL(%%time,%c)
%%button = 1
exit
end
exit
:FIRSTRUN
REM >>Used only to create a list saved to a file for this example.<<
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
List ADD,1,"135.76.230.1-135.76.230.254"
List ADD,1,"135.76.231.1-135.76.231.254"
List ADD,1,"135.76.232.1-135.76.232.254"
List ADD,1,"135.76.232.1-135.76.232.2541"
List ADD,1,"135.76.232.1-135.76.232.2542"
List ADD,1,"135.76.232.1-135.76.232.2543"
List ADD,1,"135.76.232.1-135.76.232.2544"
List ADD,1,"135.76.232.1-135.76.232.2545"
List ADD,1,"135.76.232.1-135.76.232.2546"
List ADD,1,"135.76.232.1-135.76.232.2547"
List ADD,1,"135.76.232.1-135.76.232.2548"
List ADD,1,"135.76.232.1-135.76.232.2549"
List ADD,1,"135.76.232.1-135.76.232.2540"
List ADD,1,"135.76.232.1-135.76.232.25411"
List ADD,1,"135.76.232.1-135.76.232.25422"
List ADD,1,"135.76.232.1-135.76.232.25433"
List ADD,1,"135.76.232.1-135.76.232.25444"
List ADD,1,"135.76.232.1-135.76.232.25455"
List ADD,1,"135.76.232.1-135.76.232.25466"
List ADD,1,"135.76.232.1-135.76.232.25477"
List ADD,1,"135.76.232.1-135.76.232.25488"
List ADD,1,"135.76.232.1-135.76.232.25499"
List ADD,1,"135.76.232.1-135.76.232.25400"
List ADD,1,"135.76.232.1-135.76.232.254111"
List ADD,1,"135.76.232.1-135.76.232.254222"
List SAVEFILE,1,@path(%0)subnets.dat
List Close,1
Goto Begin
rem X button
:button1BUTTON
WINDOW HIDE,About
GOTO evloop
:CLOSE
if @ask(Are you sure you want to close?)
exit
end
goto evloop
|
|
|
Back to top |
|
|
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Tue Dec 02, 2003 2:47 pm Post subject: |
|
|
Thanks for that the only problem no is that the other buttons don't work I can't add more subnets or look at the about box or even close the program!
Thanks
Mark
(So close but so f.....) |
|
Back to top |
|
|
BD Newbie
Joined: 07 Jun 2001 Posts: 10 Location: Canada
|
Posted: Wed Dec 03, 2003 1:46 am Post subject: |
|
|
Hey Mark
Like I said the timer works the rest of the code I didn't have time to test. This ought to work...
By the way shouldn't you also have a button to remove subnets?
I have done a little more testing and I think that the list is reading through ok, the last record does not appear erroneous so I have rem the line to remove the last record. I also changed the fadd and fsub to succ and pred, nicer way of doing this. Also changed the wait to 5 sec from .5 not much sense looping code that many times just uses up cycles.
Code: |
Title HfNetCHK Full Subnet Scan
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
%A = @item(1)
If @null(%A)
List Close,1
goto FIRSTRUN
End
List Close,1
%f = @DATETIME(yy-mm-dd)
%y = %F %Z
%%button = 0
:begin
rem Dialog
DIALOG CREATE,HfNetCHK Full Subnet Scan,-1,0,553,227
DIALOG ADD,STYLE,STYLE2,Tahoma,16,I,BACKGROUND,RED
DIALOG ADD,STYLE,STYLE1,Courier New,8,L,BLACK,DKGREEN
DIALOG ADD,GROUP,GROUP1,4,296,254,220,Subnets that will be scanned
DIALOG ADD,LIST,LIST1,18,304,238,198,STYLE1
DIALOG ADD,BUTTON,RUNSCAN,198,10,64,24,Run
DIALOG ADD,BUTTON,ADD,198,92,110,24,Add Subnet to Scan
DIALOG ADD,BUTTON,ABOUT,198,220,64,24,About
DIALOG ADD,TEXT,TEXT1,4,16,,,HfNetCHK Full Subnet Scan,STYLE2
DIALOG ADD,EDIT,TIMETORUN,46,150,132,19,11:00 AM
DIALOG ADD,TEXT,TEXT2,48,10,,,Time to run daily scan:
DIALOG ADD,GROUP,GROUP2,70,10,274,118,Advanced Options
DIALOG ADD,TEXT,TEXT3,88,20,,,Command Line Option:
DIALOG ADD,EDIT,CMDLINE,106,20,258,18,c:\tools\hfnetchk\hfnetchk -o tab -vv
DIALOG ADD,TEXT,TEXT4,136,20,,,"Leave off the subnet and filename switch's"
DIALOG SHOW
List CREATE,LIST1
List LOADFILE,LIST1,@path(%0)subnets.dat
rem populate subnets to scan
rem evloop
:evloop
wait event
%e = @event()
if @equal(%e,runscanBUTTON)
repeat
wait 5
Gosub timer
until @equal(%%button,1)
%%button = 0
end
goto %e
rem Abbout button
:AboutBUTTON
DIALOG CREATE,About,-1,0,395,255,ONTOP
DIALOG ADD,STYLE,STYLE1,Courier New,18,B,BACKGROUND,RED
DIALOG ADD,BITMAP,BITMAP1,116,12,376,132,C:\Documents and Settings\mgosling\Desktop\Visual Dialog Script\HFNETSCAN\logo.bmp
DIALOG ADD,BUTTON,BUTTON1,84,312,64,24,OK
DIALOG ADD,TEXT,TEXT1,8,2,,,HfNetCHK Full EMEA Scan V2.0,STYLE1
DIALOG ADD,TEXT,TEXT2,44,80,,,By Mark Gosling,STYLE1
DIALOG ADD,TEXT,TEXT3,88,30,,,"For Help and Support contact email address here"
DIALOG SHOW
goto evloop
rem Add subnet button
:addBUTTON
%a = @INPUT(Use format x.x.x.1-x.x.x.254)
If @null(%A)
Info There was nothing to add!
goto evloop
End
List Insert,LIST1,%A
List SAVEFILE,LIST1,@path(%0)subnets.dat
List Close,LIST1
goto evloop
rem start button
:runscanBUTTON
LIST LOADFILE,1,subnets.dat
List seek,1,0
%A = @item(1)
%%counter = 0
%%records = @count(1)
rem dont think we need this
rem %%lastrecord = @pred(%%records)
Repeat
%z = @NEXT(1)
%%CMDLINE = @DLGTEXT(CMDLINE)
%%fixed = -r %z -f %y-%z.txt
info %%CMDLINE %%FIXED
%%counter = @succ(%%counter)
UNTIL @equal(%%counter,%%records)
goto evloop
:Timer
%%time = @DLGTEXT(TIMETORUN)
%c = @DATETIME(t)
if @EQUAL(%%time,%c)
%%button = 1
exit
end
exit
:FIRSTRUN
REM >>Used only to create a list saved to a file for this example.<<
List CREATE,1
List LOADFILE,1,@path(%0)subnets.dat
List ADD,1,"135.76.230.1-135.76.230.254"
List ADD,1,"135.76.231.1-135.76.231.254"
REM List ADD,1,"135.76.232.1-135.76.232.254"
REM List ADD,1,"135.76.232.1-135.76.232.2541"
REM List ADD,1,"135.76.232.1-135.76.232.2542"
REM List ADD,1,"135.76.232.1-135.76.232.2543"
REM List ADD,1,"135.76.232.1-135.76.232.2544"
REM List ADD,1,"135.76.232.1-135.76.232.2545"
REM List ADD,1,"135.76.232.1-135.76.232.2546"
REM List ADD,1,"135.76.232.1-135.76.232.2547"
REM List ADD,1,"135.76.232.1-135.76.232.2548"
REM List ADD,1,"135.76.232.1-135.76.232.2549"
REM List ADD,1,"135.76.232.1-135.76.232.2540"
REM List ADD,1,"135.76.232.1-135.76.232.25411"
REM List ADD,1,"135.76.232.1-135.76.232.25422"
REM List ADD,1,"135.76.232.1-135.76.232.25433"
REM List ADD,1,"135.76.232.1-135.76.232.25444"
REM List ADD,1,"135.76.232.1-135.76.232.25455"
REM List ADD,1,"135.76.232.1-135.76.232.25466"
REM List ADD,1,"135.76.232.1-135.76.232.25477"
REM List ADD,1,"135.76.232.1-135.76.232.25488"
REM List ADD,1,"135.76.232.1-135.76.232.25499"
REM List ADD,1,"135.76.232.1-135.76.232.25400"
REM List ADD,1,"135.76.232.1-135.76.232.254111"
REM List ADD,1,"135.76.232.1-135.76.232.254222"
List SAVEFILE,1,@path(%0)subnets.dat
List Close,1
Goto Begin
rem X button
:button1BUTTON
WINDOW HIDE,About
GOTO evloop
:CLOSE
if @ask(Are you sure you want to close?)
exit
end
goto evloop
|
|
|
Back to top |
|
|
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Wed Dec 03, 2003 10:40 am Post subject: |
|
|
Hi BD,
I can't thank you enough for getting this working
I would have had a remove button aswell but I didn't know how to do it
Thanks again
Mark |
|
Back to top |
|
|
Mark Newbie
Joined: 27 Nov 2003 Posts: 8
|
Posted: Wed Dec 03, 2003 12:11 pm Post subject: |
|
|
Hi,
Just testing the code and I've noticed that it only goes through the list of subnets that are listed in the code and not the ones that are in the 'subnets.dat' file. Therefore subnets that have been added are not used.
Thank's for all your help
Mark |
|
Back to top |
|
|
vdsalchemist Admin Team
Joined: 23 Oct 2001 Posts: 1448 Location: Florida, USA
|
Posted: Wed Dec 03, 2003 3:12 pm Post subject: |
|
|
Serge wrote: | fair enough, bd...didn't know if you knew...i agree that it would be nice if we could do that
serge |
Hi Serge,
I have a DLL that will allow you to define a character or phrase that you would like to use as a comment. You can download it http://dragonsphere.vdsworld.com/vdscomment.zip
The DLL should work for all versions of VDS. _________________ Home of
Give VDS a new purpose!
|
|
Back to top |
|
|
Vic D'Elfant Past Contributor
Joined: 26 Jun 2002 Posts: 673 Location: The Netherlands
|
Posted: Wed Dec 03, 2003 7:04 pm Post subject: |
|
|
I would like to be able to use php-style comments... like '//' and '/* this is some text */'
Vic _________________ phpBB Development Team |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|